Torich International Limited
We focus on Quality First, Quality Traceability, and Quality Stability! We focus on Customer First, People First, and Quality-Oriented!
Add to Cart
GOST 30245Steel bent closed welded square and rectangular section for building
Rectangular Hollow Sections
Application:for steel Building Structures.
Manufacture method:Shaping the round tubular section with longitudinal weld(Automatic high frequency welding) and consequent spellerizing to square or rectangular section.
The article sections shall conform to those specified in fingures 1 and 2
Remark: h—Height(width)；b—width；t—wall thickness；R—edge radius；I—Inertia moment；W—resistance moment；i—radius of inertia
h:50-400mm t:4-14mm
Tolerance:
--+/-1.5mm for a section height (width)of up to 100mm
--+/-2.0mm for a section height(width)exceeding 100mm.
In case of a section with a height (width)of 100 mm and a wall thickness of 7mm,The maximum deviation of the section height (width ) shall not exceed +/-2.0mm
3.The deviation of an angle in a cross-section from 90 °shall not exceed +/-1°30’,In case of sections with a wall thickness from 7 to 14mm,The maximum deviation from 90° shall not exceed +/-2°